NewStats: 3,264,216 , 8,182,995 topics. Date: Tuesday, 10 June 2025 at 08:15 AM 64482iq6w2h |
My Corolla Not Responding To Acceleration Pedal And Not Starting. - Car Talk - Nairaland 4o243h
My Corolla Not Responding To Acceleration Pedal And Not Starting. (252 Views)
(1) (Go Down)
| lanrezy: 4:43pm On Jun 06 |
|
On one evening, the car just went off. I tried starting it but it refused to start. It will try to start then immediately go off. So mechanic came and unclip and then reclip the brainbox, then it started and was able to drive. But it will gradually start stalling and not respond to acceleration at some point until i allow it rest for some minutes, repeating the process again. Now it does not start again. I will attach the scanned codes
|
| lanrezy: 4:45pm On Jun 06 |
|
Car that had no dashboard error lights or codes. Started having 21 errors codes
|
| 2cribz: 5:07pm On Jun 06 |
|
21 error codes on top that small corolla. Oga no drive am again, e fot catch fire in motion. Sell it off. Scrap |
| lanrezy: 5:31pm On Jun 06 |
2cribz: It was a clean car with no error code before that problem occurred. Suddenly, 21 error codes came |
| 2cribz: 5:43pm On Jun 06 |
|
Yea naija used and driven to sapa level.i hate cheap car.
lanrezy: |
| SpaceAngel: 6:26pm On Jun 06 |
|
you have plenty codes because you removed connector to the ECU, reset the codes again then try driving the car after that read the new codes that are left so you can start from there
3 Likes |
| lanrezy: 6:48pm On Jun 06 |
SpaceAngel: The ECU is not removed and it is currently there but still won’t start. It has also cleaned and all of that, still |
| SpaceAngel: 6:58pm On Jun 06 |
lanrezy: Read my comments well. You already said it yourself. It was unclipped and reclipped. I'm sure it was done with the battery head connected too. Do as i explained and check how many codes left then you can determine which is the real issue 3 Likes |
| correctyourself(m): 7:17pm On Jun 06 |
lanrezy: Let him serve the. following sensor (crankshaft position sensor, Coolant Temperature sensor, camshaft position sensor, oxygen sensors, mass airflow sensor, throttle position sensor It's just to remove it and wash off the mud, fox it back to see the reaction |
| lanrezy: 8:24pm On Jun 06 |
SpaceAngel: Let me get you right. I should clear the code,remove and reconnect the battery then drive (but the car doesn’t start)? |
| Nbotee(m): 10:45pm On Jun 06 |
|
Did you you buy petrol before noticing these signs??
|
| lanrezy: 7:14am On Jun 07 |
Nbotee:No |
| Dzzzz: 7:52am On Jun 07 |
|
Man these codes are damn too much WTH..Try check the alternator belt maybe e never cut cause if that thing cut,car go Dey do like say e high on colos..
|
| KillahPriest: 8:57am On Jun 07 |
|
R.I.P gazzuzz 
|
| kingreign(m): 10:27am On Jun 07 |
|
ECM may be fried or the ground wire to engine from the main harness is not connected or some wires have been chewed by rodents. Ask your kazeem to trace ground wires and then check ECM if it's fried or if rodents have chewed wires. |
| lanrezy: 12:08pm On Jun 07 |
kingreign: He has concluded we get a new brainbox |
| kingreign(m): 2:10pm On Jun 07 |
lanrezy: Did he trace the cause of the problem before getting a replacement ECM? |
| lanrezy: 8:51pm On Jun 09 |
kingreign: The brainbox was replaced and the car is okay now. Although it only came with some transmission code |